SKU:101-0198
CANJST4 - CAN Connection Cable for Plugin ECU's (4pin)
Supplies CAN and Power on G4X Plug-ins with 4 Pin CAN Connector
Find an Installer
Search near youTo ensure the best possible experience with our products, we recommend you engage one of our official Dealers for installation and set-up.
Contact a Link dealer near you to find out more
You may also need
Overview
The Link 300mm CANJST4 is required to add CAN communications & power to recently released G4X Plug-in ECU's which have the new 4 Pin powered CAN connector (not the older 5 pin CAN connector). Plugs directly into the socket on the ECU PCB, provides CAN and a protected 12V supply to allow easy connection of CAN accessories. Suitable for powering a CAN Lambda, Dash, EGT amplifier or other similar low powered CAN devices which have a total continuous current draw of <3A.
Models Supported |
Suitable Plug-ins are listed below: 214-4100 - Plug-in ECU G4X Nissan GTR with E-Throttle 217-4100 - Plug-in ECU G4X Nissan S15 with E-Throttle 233-4000 - Plug-in ECU G4X Honda S2000 AP1 228-4000 - Plug-in ECU G4X Subaru WRX V5-6 237-4000 - Plug-in ECU G4X Honda HC20X Type-R DC5/RSX 238-4000 - Plug-in ECU G4X Subaru WRX11 239-4000 - Plug-in ECU G4X MX5NB2X 240-4000 - Plug-in ECU G4X MX5NB1X 243-4000 - Plug-in ECU G4X WRX11 USDM 241-4200 - G5 ECU Plug-in - Toyota GT86/Subaru BRZ LHD 241-4000 - G5 ECU Plug-in - Toyota GT86/Subaru BRZ RHD |
Specifications
Product Dimensions | 400mm(L)x20mm(W)x20mm(H) 15.75in(L)x0.79in(W)x0.79in(H) |
Product Weight | 35 grams (1.23 ounces) |
Material | 300mm |
Electrical | Maximum Input Voltage: 300V Maximum Continuous Current Draw: 3A Gauges of wire: 20AWG/0.5mm2 |
What's in the Box | CANJST4 - Link CAN Connection Cable for Plug-in ECUs |
Raw Calibration Specs | Pin 1: 12V Pin 2: Ground Pin 3: CAN Low Pin 4: CAN High |
Connector | DTM4 Male to JST4. 12V and GND Terminated to JST4. |
