VSeries PlugIn
Plugin
Home » Vi-Pec ECU’s » Vi-Pec Products »
Vi-PEC PlugIn ECUs provide a straight forward way to gain full control over your engine functions whilst still keeping the stock appearance of the original computer case.
![ViPec-Nissan-GTS-GTR-V-PlugIn](https://linkecu.com/wp-content/uploads/2022/04/ViPec-Nissan-GTS-GTR-V-PlugIn.jpg)
![ViPec-Mitsubushi-Galant-VR4-V-PlugIn](https://linkecu.com/wp-content/uploads/2022/04/ViPec-Mitsubushi-Galant-VR4-V-PlugIn.jpg)
![ViPec-Subaru-WRX-1997-1998-V-PlugIn](https://linkecu.com/wp-content/uploads/2022/04/ViPec-Subaru-WRX-1997-1998-V-PlugIn.jpg)
Vi-PEC has produced replacement ECU boards and adaptors for the original ECU on many different makes and models.
- The original motherboard and connector are removed from the ECU case and the Vi-PEC motherboard and connector clips or screws into the case. The original harness plugs in and the job is done, no wiring and all original sensors are used. External view of ECU case and connector is unchanged from its stock appearance.
- Most PlugIn ECUs have an internal 2.5 bar map sensor. An optional 7 bar map sensor is available. External map sensors are also supported.
- Considerable gains in power across the complete RPM range can be achieved with these boards. Both road car and Group N rally car versions are available.
- Allows full control over fuel, ignition timing, boost pressure and all other engine functions. All boards have QuickTune software and optional Anti-lag.
- All boards are supplied with base programs available. Some final tuning will be required.
Features
PlugIn Features
Ignition Outputs | 4 |
Injector Outputs | 6 |
Auxiliary Outputs (PWM or On/Off) | 8 |
Analog Input Voltage | 6 |
Analog Input Temperature | 3 |
Digital Inputs | 6 |
Knock Sensor Input (model dependent) | 0-2 |
Peak & Hold Injector Drives (model dependent) | N |
Internal MAP Sensor | 4 Bar |
User Define GP On/Off | Up to 10 |
User Define GP PWM Tables | Up to 10 |
Variable Cam Control | Up to 4 |
Idle Control for 2 & 3 Wire Valves | Y |
Idle Control, 4 & 6 Wire Stepper | Y |
Boost Control | Y |
Antilag | Y |
Flat Shift | Y |
Launch Control | Y |
Logging Memory (ECU) | 4MB |
Closed Loop Narrow Band | Y |
Closed Loop Wideband WOT (External wideband controller required) | Y |
E-Throttle (DBW) | Some |
Knock Control (External amplifier required) | Y |
QuickTune | Y |
PC Memory Logging | Y |
Models
Software
Support