V88

V88

ViPec V44 PlugIn ECU

The Vi-PEC V88 has many features which allow it to be setup to suit various types of engine configurations. It has very flexible options over how the inputs and outputs are controlled, and allows the user to design their own functions to control all sorts of devices. Precise control of injectors and ignition angle are guaranteed at very low or high RPM or manifold pressures. A very high level of protection from interference and tolerance of trigger input errors has been built into this ECU, ensuring a smooth running engine even under the most demanding conditions.

  • Variable camshaft control for up to four camshaft. Control of camshaft position is very precise and time taken to advance from full retard to full advance is less than 1 second. Support for VVT and VANOS systems.
  • Closed loop control of idle speed and boost pressure makes for a "factory" idle speed stability, and precise control of boost pressure. Boost control can be setup to provide a different boost in each gear.
  • Individual Cylinder Knock control, with support for two sensors. Knock control is user definable with flexible settings to allow precise knock control.
  • E-Throttle (Electronic Throttle Control).
  • Peak and hold injector drivers are 10 amp. Both the peak Amps and hold Amps can be set separately in the software for optimum injector control.
Features

V88 Features

Ignition Outputs 8
Injector Outputs 8
Auxiliary Outputs (PWM or On/Off) 10
Analog Input Voltage 11
Analog Input Temperature 4
Digital Inputs 10
Knock Sensor Input 2
Peak & Hold Injector Drives Y
Internal MAP Sensor No
User Define GP On/Off Up to 18
User Define GP PWM Tables Up to 12
Variable Cam Control Up to 4
Idle Control for 2 & 3 Wire Valves Y
Idle Control, 4 & 6 Wire Stepper Y
Boost Control Y
Antilag Y
Flat Shift Y
Launch Control Y
Logging Memory (ECU) 4MB
Closed Loop Narrow Band Y
Closed Loop Wideband WOT (External wideband controller required) Y
E-Throttle (DBW) Y
Knock Control Y
QuickTune Y
PC Memory Logging Y
Hardware
Software
Specifications
Documents
Support